|Place of Origin:||China|
|Minimum Order Quantity:||One 40 HQ Container|
|Delivery Time:||1 week|
|Payment Terms:||L/C, T/T or Western Union|
|Supply Ability:||3,000 Metric Tons per Month|
|Voltage Grade:||220kv||Suitable Place:||Electrical Power Transformer Substation|
|Welding:||According To AWS D 1.1, CO2 Welding Or Submerged Arc Auto Methods||Painting:||According To Clients' Request|
|Joint Of Poles:||Insert Mode,inner Flange Mode,face To Face Joint Mode||Thickness:||3.0mm, 3.5mm, 4.0mm|
galvanised steel poles,
mono pole tower
Our steel pole, steel poles , steel power poles , power distribution equipment , electric power transimission &distribution steel poles ,hot-dip-galvanized steel poles ,lamp poles ,street lamp poles ,solar street lamps steel poles ,high mast lamp poles,road lamp poles, the steel street lamp poles, hot-dip-galvanized steel lighting ,outdoor lighting ,outdoor lamps ,street lighting poles ,steel post ,street poles, lamp parts ,lighting fixture ,lighting poles ,lighting equipment ,lighting decoration ,lighting product , street lighting body, high mast lighting steel poles &tower,electric poles, round&square street lighting steel poles with double arm or single arm . Stainless steel poles, Flag mast stainless steel pole, aluminum street light poles, traffic lighting steel poles, telecom tower poles are made by hot-roll steel coil ,the process as cut plate, bending ,forming,automatic welding,drill holes ,quality check before galvanized, hot dip galvanized or powder coating , final quality check according by client required.
All of our material are purchased from famous factory to assure the high quality.
A factory certificate issued by the factory with stamp and signature must be provided before unloading the material in our
factory , otherwise we have rights to refuse.
Before put into production , all the material must be passed the chemical and physical analysis to make sure that they have
met the requested strength and component.
To assure our products qualified , we take steps as follows :
1. Management team : We have employed the experienced senior experts to take charge of the whole management
,especially the technical management and quality management .
2. Introducing ISO management :We are aware of ISO 9001:2008 certificate .
3. QC Inspection :It is our company policy that all the finished products should be inspected by our specialized QC in every
manufacture step and before each shipment
Design and Detail
Lofting and designing software :We have transmission power pole designing software which can help us design all kinds of
steel poles ,at the same time ,the TMA and LMA are adopted by us to design the drawing accurately
The Hot Dip Galvanized Electrical Power Steel Tubular Pole plays an important role in electrical power transmission and distribution industry. In order to meet the increasingly higher demand for steel tubular pole, our company design and produce many kinds of steel tubular pole for the power transmission and distribution system. Besides, our electrical steel tubular pole have been tested and approved by the Transmission Pole Tower Testing Station.
As an alternative to the traditional wood and concrete poles, our hot dip galvanized steel tubular pole could be utilize to bear the conductors and electric distribution equipment, power transmission equipment, cables, etc.
our company has more than 15 years' design & manufacture experence which enable us to handle volume orders with high quality and low cost. In order to provide better service for customers, we promise to reply within 24 Working Hours and technical support by E-mail and calling service.
* Covered by Plastic Wrap or Mat or according to client's requests.
* The Loading Pcs of Each Container could be calculated according to client's specification and data
1 - 1
To be negotiated
Raw material: Q235 or Q345 in China. We get the raw material checked in our lab test room. Silicon less than2%. We have carbon and sulfur analyzer to check the elements of the steel sheet. We'll return the steel if they are unqualified. So in this way, we can control the quality of the steel poles from the first beginning.
Our factory owns advanced production lines and machines including bending calibration machine, hydraulic plate shears machine, shears machine, slitting machine, 208T hydraulic straightener, etc. All insure us to produce steel poles with the best quality.
After the fabrication process as cutting plate, bending, forming, automatic welding, drilling holes, we get poles checked before galvanized, hot dip galvanized and powder coating and finally we get poles checked according to client's requirements.
Jiangsu Hongguang Steel Pole Co., Ltd.
Address: Wanshi Industrial Zone, Yixing City, Jiangsu Pro., P.R.China, 214212
Telphone: +86 510 878 441 56
Fax: +86 510 878 435 28
Trade manager ID: cnhgsteelpole
Please feel free to contact us!
Contact Person: Zoe Tang